Bass Booster System 1499.99

This is our biggest selling item. An 18" sub cabinet powered by a 350 watt internal amplifier gives you all the bass you can stand. It connects directly to your Leslie to provide more than enough guts to fill any size room.

Vari-Pitch Transposer and Pitch Regulator   Compensates for Line Frequency Changes

Trek II  Call for prices

SSP-3A  SOLID STATE PRE-AMP   

Replaces pre-amps used in most standard Hammond tone wheel consoles.  Building on the heritage of the original SSP-3, the new SSP-3A has been carefully designed to faithfully reproduce the response of the original tube pre-amp when it was new. Eliminate the intermittent static, crackling, loss of volume, and general degradation of sound quality that can be caused by aging components in the original pre-amp.

STANDARD FEATURES:

• Built in reverberation utilizing a full size Accutronics three spring delay line

• Built in power supply

• Built in Leslie 122 tremolo control circuitry, functions with original
   tremolo switch or TS-2

• Built in power on circuitry for 11 pin Leslies

• Functions with original swell pedal and linkage or can be used with
   remote floor type pedal. For portable applications, a custom Ernie Ball
   volume pedal model EB-100K is available.

OPTIONS:

PERCUSSION CONTROL HEAD

By adding the TP-3B percussion control head, the percussion circuitry of the SSP-3 can be utilized to add B-3 type percussion to older consoles which did not originally have this feature. When purchased together, a package price is available.

AUXILIARY AMPLIFIER CHANNELS

Provides 2 additional amplifier channels and a separate enclosure with input jacks, output jacks and level controls.  These channels may be used to play other keyboard instruments, rhythm units, etc. through their own amplification system, but under the control of the organ swell pedal.  In addition, either input can be routed through the organ sound system by moving a jumper on the circuit board.  When configured this way, the AUX-1 input will be expressed, and the AUX-2 input will be un-expressed.

BASS, TREBLE, AND PERCUSSION LEVEL

Provides precise control over the organ's bass, treble, percussion and overall level. Mounted on the SSP-3A chassis, these controls allow the organ owner to set sound to his preference and not have to worry about other organists tampering with the settings.

BASS, TREBLE, AND PERCUSSION LEVEL END BLOCK

Provides precise control over the organ's bass, treble, percussion and overall level. The BTC-2A mounts in place of either left end block and gives the organist the ability to tailor the sound while performing.

EFFECTS LOOP

Provides a separate enclosure with LINE LEVEL effects send and return jacks for adding the effects device of your choice to the SSP-3A

SSP-1C  SOLID STATE PRE-AMP

Replaces the AO-15331 two tube (#56-#57) pre-amps used in very early standard Hammond consoles.

RV-1C  REVERBERATION UNIT

For use in most standard Hammond consoles.  Uses a full size three spring Accutronics delay line for a natural reverb sound.  Designed specifically to interface with vacuum tube circuitry of Hammond tone wheel consoles. Includes reverb level control. For most installations, connection to the organ pre-amp is made with a supplied tube interface socket.

NOTE: The RV-1C is not compatible with BV, CV or DV type organs.

SPECIFY ORGAN MODEL

Return to Contents

STRING BASS / TRANSPOSERS

SB-2500B  STRING BASS UNIT

Provides 25 notes of deep rich bass with sustain and pluck effect.  Installs in standard consoles utilizing the existing pedal switch contacts. Separate 8' and 16' outputs function with the existing pedal drawbars.  Although designed to be played from the existing pedals, it will work with any single make contact assembly or keyboard.

FEATURES:

• Adjustable sustain length

• Adjustable pluck effect

• Quartz tuning accuracy

• Separate outputs available for connection to external amplifier

NOTE: The SB-2500B is also available in a version for use as a replacement bass pedal generator in organs with unreliable, un-repairable, or poor sounding pedal sections (E-100, R-100 ETC.)

SPECIFY ORGAN MODEL AND SERIAL NUMBER

TR-3  TRANSPOSER   

Works with most Hammond organs utilizing a top octave generator IC. Will allow the organ pitch to be shifted in discrete semitone steps as much as 2 semitones sharp or 4 semitones flat.

INSTANTLY:

• Shift your playing into a singer's vocal range

• Modulate from key to key

• Accompany other instruments playing in "difficult" keys

NOTE: The TR-3 is not compatible with tone wheel type organs.

SPECIFY ORGAN MODEL AND SERIAL NUMBER

TR-3-6  TRANSPOSER   

Special version of the TR-3 made specifically for X-66 organs.  In addition to adding the transposer function, the TR-3-6 replaces the entire 12 note tone wheel generator used in these organs, making it a cost effective solution in cases of motor failure.

TP-2B  PERCUSSION UNIT

Adds the famous B-3 type percussion sound to pre-B-3 consoles.  Mounts in place of the upper left hand end block.

FEATURES:

• Three harmonics... second, third and fifth

• Slide controls for each harmonic

• Adjustable decay rate

FEATURES:

• Built in power supply

• Built in tremolo control circuitry for 122 type Leslie speakers, functions with original tremolo switch or TS-2

• Adjustable tone control

• Compatible with RV-1C

NOTE: The SSP-1C is not compatible with BV, CV or DV type organs.

UC-1A  COMBO PRE-AMP 

Allows most single channel Leslie speakers to be driven by your portable organ, guitar, synthesizer or mixer. Two 1/4" phone jack inputs, one for high level signals, one for low level signals.

FEATURES:

• Foot switch tremolo control

• Foot switch power on / off

• Power and tremolo indicators

• Input level and tone controls

• Four different outlets to accommodate each of the Leslie families listed below. May be used singularly or in any combination. (Leslie connector cables not included.)